00000035 |
Previous | 35 of 293 | Next |
|
small (250x250 max)
medium (500x500 max)
Large
Extra Large
large ( > 500x500)
Full Resolution
All (PDF)
|
34 TRAPPING. way out of the holes, above the surface of the wood, where they are to be tied to a string. In the half circle of wood, cut small grooves, and open the wire loops so that the wire may lie in these grooves, then plaster them over with mould. To set the trap, select a tough green stick to act as a springle, and tie a piece of strong cord to the end of it. Pass the other end of this cord through the hole in the middle of the trap, and tie a knot in it. This hole must be large enough to allow the knot to pass through easily. A little wedge of wood, as seen in fig. 2, is then pushed up between the knot and the wood underneath, so as to keep the knot from slipping through, and two pieces of wood are to be placed across the trap, to keep it down to the ground. The springle being fixed in the ground, is now driven down and tied to the string to which the wires are attached. The trap is rig. 2. Mole Trap. then to be set in the places previously marked, and when the mole attempts to pass through its run, it is compelled to go through one of the half circles of the trap, and in doing so, it moves the wedge which holds the knot of the string tied to the springle. This done, the spring flies up, draws the wire loops tight, and the mole and the trap a:e by this means both suspended in the air. Fig. 28—Mole Trap on " Figure Four " Principle. A more simple trap, but very effective one, is shown in the diagram.
Title | The boys' own book of outdoor sports |
Creator | John, Uncle |
Publisher | Hurst & company |
Place of Publication | New York |
Date | [1887?] |
Language | eng |
Type | Books/Pamphlets |
Title | 00000035 |
Type | Books/Pamphlets |
Transcript | 34 TRAPPING. way out of the holes, above the surface of the wood, where they are to be tied to a string. In the half circle of wood, cut small grooves, and open the wire loops so that the wire may lie in these grooves, then plaster them over with mould. To set the trap, select a tough green stick to act as a springle, and tie a piece of strong cord to the end of it. Pass the other end of this cord through the hole in the middle of the trap, and tie a knot in it. This hole must be large enough to allow the knot to pass through easily. A little wedge of wood, as seen in fig. 2, is then pushed up between the knot and the wood underneath, so as to keep the knot from slipping through, and two pieces of wood are to be placed across the trap, to keep it down to the ground. The springle being fixed in the ground, is now driven down and tied to the string to which the wires are attached. The trap is rig. 2. Mole Trap. then to be set in the places previously marked, and when the mole attempts to pass through its run, it is compelled to go through one of the half circles of the trap, and in doing so, it moves the wedge which holds the knot of the string tied to the springle. This done, the spring flies up, draws the wire loops tight, and the mole and the trap a:e by this means both suspended in the air. Fig. 28—Mole Trap on " Figure Four " Principle. A more simple trap, but very effective one, is shown in the diagram. |
|
|
|
B |
|
C |
|
G |
|
H |
|
M |
|
T |
|
U |
|
Y |
|
|
|